※ Condenser
In order to avoid the high-temperature media damaging the differential pressure transmitter,the condenser shall be installed at the connecting pipe between the throtting device and the differential pressure transmitter for the purpose of protecting the differential pressure transmitter.
(1)Models and Application Range: |
|
Model |
Application Range |
|
FL-6.4 |
Pressure≤6.4Mpa |
|
FL-10 |
Pressure≤10.0Mpa |
|
FL-20 |
Pressure≤20.0Mpa |
|
FL-30 |
Pressure≤30.0Mpa |
|
|
(2)Structure Form:(shown as the right picture)
※ Seal pod
In order to avoid the caustic media damaging the differential pressure transmitter,the seal pod shall be installed at the connecting pipe between the throttling device and the differential pressure transmitter for the purpose of protecting the differential pressure transmitter.
FG-A Type is asopted when the medium weight is more than the weight of separating liquid
FG-B Type is asopted when the medium weight is less than the weight of separating liquid
(1)Models and Application Range: |
|
Model |
Application Range |
|
FG-6.4A |
Pressure≤6.4Mpa |
|
FG-10A |
Pressure≤10.0Mpa |
|
FL-6.4B |
Pressure≤6.4Mpa |
|
FL-10B |
Pressure≤10.0Mpa |
|
|
(2)Structure Form:(shown as the right picture)
※ Gas ohamber,sediment
When the measured media is liquid,in order to aviod influencing the measurement caused by the existing gas in the guided pressure pipe,generally the gas chamber shall be installed at the top of the guide pressure pipeline,so as to drain the gas in the guided pressure pipeline periodically and attain to the purpose of increasing the measuring accuracy.
When the measured media is gas,in order to avoid influencing the measurement caused by the exising liquid in the guided pressure pipe,generally the sediment shall be installed at the top of the guided pressure pipeline,so as to drain the liquid in the guided pressure pipeline periodically and attain to the purpose of increasing the measuring accuracy.
(1)Models and Application Range: |
|
Model |
Application Range |
|
FJ-6.4 |
Pressure≤6.4Mpa |
|
FJ-10 |
Pressure≤10.0Mpa |
|
FC-6.4 |
Pressure≤6.4Mpa |
|
FC-10 |
Pressure≤10.0Mpa |
|
|
(2)Structure Form:(shown as the right picture)
※ Balancer
When measuring the liquid levels of the open-top container or the low-pressure container,thesinglelayer balancer shall be adopted.
When measuring the top water-level of the boiler,the double-layers balancer shall be adopted.
(1)Models and Application Range: |
|
Model |
Name |
Application Range |
|
FP6.4A |
single-layer balancer |
Pressure≤6.4Mpa |
|
FP-20A |
single-layer balancer |
Pressure≤20.0Mpa |
|
FP-32B |
single-layer balancer |
Pressure≤32.0Mpa |
|
FP-6.4B |
double-layer balancer |
Pressure≤6.4Mpa |
|
FP-25B |
double-layer balancer |
Pressure≤25.0Mpa |
|
 |
| (2)Structure Form:(shown as the right picture) |
